In stock
In stock
-
Rocks sold separately. You will need to order 2 boxes (20kg each) of rocks to go with this heater.
You will need to order a North American chimney adapter (4″ to 6″) for this product.
Need help finding the right heater for your sauna? Use our sauna calculator here.
Read More$732.95
Harvia Linear 16
Linear 16 is a sturdy sauna stove with fresh design
Harvia Linear 16 woodburning sauna stove is a source of glowing heat and magnificent bath for small saunas. The simple, sculptural design adds timeless style to the sauna. Through the cast-iron glass door the warm glow of the fire adds to the sauna atmosphere. The opening direction of the door can be changed.
The fire chamber and combustion air channels of Harvia stoves are designed so that sauna warms quickly and the burning is cleaner. The stoves meet the requirements for CE-marking.
The recommended size of the sauna room is 6–16 m3 and the maximum amount of stones is 36 kg.
| Model | WK160C |
| Sauna room min. m3 | 6 |
| Sauna room max. m3 | 16 |
| Stone capacity max. kg | 36 |
| Dimensions width mm | 420 |
| Dimensions height mm | 735 |
| Dimensions depth mm | 450 |
| Weight kg | 46 |
| Heater output kW | 17,9 |
| Safety distance to sides and back, masonry walls E, mm | 50 |
| Safety distance to sides (B), walls and benches made of inflammable materials, mm | 300 |
| Safety distance to back (C), walls and benches made of inflammable materials, mm | 350 |
| Safety distance to front (D) mm | 400 |
| Safety distance from upper surface to ceiling A min. mm | 1300 |
| Fire chamber cover mm | 5 |
| Location of smoke outlets at rear: from floor to centre of hole mm | 560 |
| Location of smoke outlets on top: from rear edge to centre of hole mm | 130 |
| Upper connection opening, location from floor mm | 635 |
| Diameter of smoke outlet mm | 115 |
| Leave 50 mm between the stove and walls, provided that the air can circulate in front and to one side of the stove. If the stove is installed in a recessed wall, leave 100 mm between the stove and walls for the air circulation. |
Read and follow at all times the Harvia Installation instructions
| Weight | 109 lbs |
|---|---|
| Dimensions | 18 × 20 × 31 in |
You may also like…
Out of stock
The Harvia steel chimney with accessory kit is a stylish, stainless steel chimney solution that is easy to install. The steel chimney withstands extensive changes in temperature and has mainly been designed for use with wood-heated wood burning heaters, smaller fireplaces and iron wood burning heaters in detached sauna buildings. The standard delivery of the steel chimney includes the steel chimney and a utility box with 1.0 m of non-insulated smoke pipe, a rain cap, a rubber rain flange and an installation set for the rain flange, a stainless steel lead-through flange for the ceiling and a lead-through insulation and protector. Thanks to an ingenious joint mechanism, the steel chimney can easily be extended. Choose top-of-the-line Harvia quality.
Read More
In stock
The water tank of the pipe model (22 l) is mounted directly onto the stove. The pipe-mounted water heater gets its heat energy from the hot combustion gases of a wood-burning stove, which are conducted to the chimney through the smoke pipe in the heater. As the pipe model is an efficient and fast water heater, water usually starts to boil when the stove is heated. To prevent boiling, remove some of the warm water from the heater and replace it with cool water. The heater should always be kept as full as possible. Fits all Harvia woodburning stoves except Harvia 50.
Read MoreRelated products
