This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More
Out of stock
Out of stock
-
Rocks sold separately. You will need to order 6 boxes (20kg each) of rocks to go with this heater.
You will need to order a North American chimney adapter (4″ to 6″) for this product.
Need help finding the right heater for your sauna? Use our sauna calculator here.
$1,262.95
Out of stock
The Harvia Cilindro 20 wood burning heater is source of glowing heat and magnificent bath for small saunas. The simple, sculptural design adds timeless style to the sauna. Through the cast-iron glass door the warm glow of the fire adds to the sauna atmosphere. The opening direction of the door can be changed.
The fire chamber and combustion air channels of Harvia wood burning heaters are designed so that sauna warms quickly and the burning is cleaner. The wood burning heaters meet the requirements for CE-marking.
The recommended size of the sauna room is 8-20 m3 and the maximum amount of stones is 120 kg.
Model | WKPC20S |
Output kW | 17 |
Sauna room min. cu. ft. (m3) | 283 (8) |
Sauna room max. cu. ft. (m3) | 706 (20) |
Sauna room height min. in (cm) | 74 7/8 (190) |
Stone capacity max. lbs (kg) | 265 (120) |
Dimensions width in (mm) | 22 (557) |
Dimensions height in (mm) | 22 (557) |
Dimensions depth in (mm) | 31 (773) |
Weight lbs (kg) | 130 (59) |
Safety distance to sides and back, masonry walls E, in (mm) | 2 (50)* |
Safety distance to sides (B), walls and benches made of inflammable materials, in (mm) | 5 7/8 (150) |
Safety distance to back (C), walls and benches made of inflammable materials, in (mm) | 7 7/8 (200) |
Safety distance to front (D) in (mm) | 19 5/8 (500) |
Safety distance from upper surface to ceiling A min. in (mm) | 39 3/8 (1000) |
Location of smoke outlets on top: from rear edge to center of hole in (mm) | 5 7/8 (150) |
Diameter of smoke outlet in (mm) | 4 1/2 (115) |
* Leave 2″ (50 mm) between the stove and walls, provided that the air can circulate in front and to one side of the stove. If the stove is installed in a recessed wall, leave 4″ (100 mm) between the stove and walls for the air circulation. |
Read and follow at all times the Harvia Instructions for installation and use
Weight | 130 lbs |
Dimensions | 22 × 22 × 31 in |
Weight | 130 lbs |
---|---|
Dimensions | 22 × 22 × 31 in |
Out of stock
The Harvia steel chimney with an accessory kit offers a stylish, stainless steel solution that is easy to install.
The chimney withstands extensive temperature changes and is ideal for wood-heated wood-burning heaters, smaller fireplaces, and iron wood-burning heaters in detached sauna buildings.The standard delivery includes the steel chimney, a utility box with 1.0 m of non-insulated smoke pipe, a rain cap, and a rubber rain flange.
It also includes an installation set for the rain flange. It also comes with a stainless steel lead-through flange for the ceiling, along with lead-through insulation and a protector. Thanks to its ingenious joint mechanism, you can easily extend the steel chimney. Choose top-of-the-line Harvia quality.
Read MoreIn stock
The water tank of the pipe model (22 l) mounts directly onto the stove. The pipe-mounted water heater draws heat energy from the hot combustion gases of a wood-burning stove. These gases pass through the smoke pipe in the heater and continue to the chimney.
Since the pipe model heats water efficiently and quickly, it often reaches boiling point when the stove is in use. To prevent boiling, remove some warm water and add cool water instead.
Loading ...